1986-1993 MUSTANGS
450 HORSE POWER 393w Stroker FORD HIGH OUTPUT
PRECISION MACHINED 351w BLUEPRINTED BLOCK
NEW SCAT CAST STEEL CRANKSHAFT 3.85 STROKE
STEEL I BEAM CONNECTING RODS WITH 190,000 PSI ARP BOLTS
SPEED PRO FORGED PISTONS 9.75 TO 1 COMPRESSION
J & E CHROME MOLY PISTON RINGS
3 PIECE STEEL ROLLER STYLE TIMING CHAIN
STEEL ROLLER RETROFIT COMP CAMS CAMSHAFT
COMP CAMS 1.6 RATIO MAGNUM ROCKERS
NEW MELLING OIL PUMP
EDELBROCK ALUMINUM RPM CYLINDER HEADS 60cc
2.02 STAINLESS STEEL INTAKE VALVES
1.60 STAINLESS STEEL EXHAUST VALVES
HARD SEATS FOR UNLEADED OR REGULAR FUEL
HEAVY DUTY 1.45 DIAMETER VALVE SPRINGS, 7 DEGREE LOCKS
COMP CAMS CHROME MOLY PUSH RODS
NEW FOX BODY REAR SUMP OIL PAN
TIMING COVER AND EFI ALUMINUM BAFFLED VALVE COVERS
HEAVY DUTY FLEXPLATE FOR AUTOMATIC APPLICATIONS (Manual Transmission Flywheel add $295.00)
BALANCED, BLUE PRINTED, HAND ASSEMBLED BY ASE TECHNICIANS
NEW HIGH PERFORMANCE EDELBROCK EFI INTAKE MANIFOLD & PLENUM
NEW POLISHED FUEL RAIL
NEW EDELBROCK 70MM THROTTLE BODY with Adapter
NEW 30lb. FUEL INJECTORS
RACE PREPPED FORD DISTRIBUTOR
NEW CHAMPION SPARK PLUGS & HEAVY DUTY IGNITION WIRES
NEW WATER PUMP
NEW DIP STICK AND TUBE 5 QUARTS OF VALVOLINE OIL AND FILTER
COMPLETE P.C.V. VENTILATION SYSTEM
TOTAL COST $9,745.00 EFI ENGINE
(94-95 Mustangs add $275.00 to price)
1-800-704-5385
Will swap over from a 5.0 litre with the use of proper Exhaust Manifolds A/C & Power Steering Brackets
86-88 year Mustangs may require conversion from Speed Density to Mass Air to run properly. Also an upgraded computer chip may be necessary to purchase (Ex: Hypertech or Superchips) to work with any modified computer controlled engine.
Wiring Harness, Sensors, ECU and front pulleys need to be transferred from original engine
Fuel Injected engines spin tested for oil pressure, leaks and compression. They are not live run tested as our Carbureted engines are. Fine tuning and breaking in is left up to the installing mechanic.
Options : V-Belt or Serpentine Pulley Setup available upon Request.
1-800-704-5385
